README.md 747 Bytes
Newer Older
Thomas Maaß's avatar
Thomas Maaß committed
1
2
3
4
# **LED control PCB**

## Summary

Thomas Maaß's avatar
Thomas Maaß committed
5
The PCB was created with Kicad and is optimized for Sound-reactive-WLED <https://github.com/atuline/WLED> and original WLED <https://github.com/Aircoookie/WLED>, but can also be used for other projects.
Thomas Maaß's avatar
Thomas Maaß committed
6

Thomas Maaß's avatar
Thomas Maaß committed
7
The maximum current is 17,5A
Thomas Maaß's avatar
Thomas Maaß committed
8
9
10
11
12
13
14
15
16
17
18

## Pinout

LED data: 2

Pushbutton: 0

IR receiver: 4

Relay: 12

Thomas Maaß's avatar
Thomas Maaß committed
19
20
21
22
23
24
25
26
Sound: 36

## Programming

Solder the Jumper IO0 to enter programming mode, unsolder for normal operation. Instead of soldering the jumper, you can also hold the pushbutton while programming.

Use a FTDI-adapter for programming. Make sure, to use the adapter in 3,3V mode. Otherwise you will destroy the ESP32.

Thomas Maaß's avatar
Thomas Maaß committed
27
28
29
![led-control-top](kicad/led-control-top.png)

![led-control-bottom](kicad/led-control-bottom.png)
Thomas Maaß's avatar
Thomas Maaß committed
30